![]() |
PARTS&Service 1-800-449-3605 |
![]() |
![]() ![]() ![]() ![]() The Solar System 52 was shipped with the following lamps: Charged Wolff® Model PB71-T12-225R Bi-Pin (Bench lamps) SPEED® 315VS-R Wolff® Model SPD75-T12-315VS-R VS-R Bi-Pin (Canopy and side tanner) Heraeus E400 HPT (facial unit) COSMOLUX® RA plus 15504/40W (shoulder unit) |
| Part Number | Part Descriptions for L-52PLAT4F | Spectrum P/N | |
|---|---|---|---|
| P01308 | Access Panel, with Decal (Latches not included) | 24544-03 | |
| 20941 | Access Panel Key (P00684)* | ![]() |
20941 |
| P01237 | Acrylic, Bench* (with Aluminum Frame) | 24293-02 | |
| P01239 | Acrylic, Canopy* (with Aluminum Frame) | 24295-01 | |
| P01241 | Acrylic, Rear Lamp Module* (with Aluminum Frame) | 24301-01 | |
| P01647 | Acrylic, Shoulder Tanner* | 23893-01 | |
| 24302-01 | Acrylic Latch Kit* (Bed acrylics) | 24302-01 | |
| 24957-01 | Acrylic Latch Kit* (Shoulder Tanner acrylic) | 24957-01 | |
| 22153 | Acrylic Protector strip* (For Support Rail) | 22153 | |
| P01091 | Adapter Gusset* | ![]() |
23526-01 |
| Antenna, Stereo* | |||
| 22766 | Ballast, SPEED® system | ![]() |
22766 |
| 24300-01 | Ballast, SPEED® system VS-R | ![]() |
24300-01 |
| 20988 | Ballast, 400W (Face Tanner) | ![]() |
20988 |
| 10126 | Ballast, 80W (Shoulder Tanner) | ![]() |
10126 |
| P01084 | Canopy Adapter Arm* | ![]() |
23521-01 |
| 20989 | Capacitor, 75 uF | ![]() |
20989 |
| 10070 | Contactor, Relay (All 3 are the same) (30 Amp) | ![]() |
10070 |
| P01448 | Cover, Canopy* (requires Canopy Cover Decal 24900-01, below) | 24545-02 | |
| 24489-01 | Current Sensor | ![]() |
24489-01 |
| 23018-01 | Damper* | ![]() |
23018-01 |
| P01534 | Decal, Canopy Cover* (Planet Beach Logo) | 24900-01 | |
| P01305 | Endcap, Bench Foot End | ![]() |
24536-01 |
| P01306 | Endcap, Bench Head End | ![]() |
24537-01 |
| P01298 | Endcap, Canopy Foot End | ![]() |
24520-01 |
| P01546 | Endcap, Canopy Head End (Will also need "Timer Keypad Pushbuttons" 23515-01) | ![]() |
24519-01 |
| P01301 | Endcap, Rear Lamp Module Foot End* | ![]() |
24526-01 |
| P01300 | Endcap, Rear Lamp Module Head End | ![]() |
24525-01 |
| P01288 | Face Tanner Assembly, Canopy* (complete reflector assembly with glass) | ![]() |
24472-07 |
| 24472-08 | Face Tanner Assembly, Rear Lamp Module* (complete reflector assembly with glass) | ![]() |
24472-08 |
| 23570-01 | Fan, 6" (220 cfm) | ![]() |
23570-01 |
| P01324 | Fan, Body Assy complete (as shipped) instr. | 24662-02 | |
| 22896-02 | Fan, Round (825 cfm) | ![]() |
22896-02 |
| 10081 | Fan, Square (110 cfm) | ![]() |
10081 |
| 22847 | Filter(s)* | ![]() |
22847 |
| 23135-01 | Handle Kit* (Includes all parts and screws for Handle replacement) | 23135-01 | |
| 23078-01 | Hardware Kit, Assembly* (Includes screws for the endcaps and six bolts and nuts for the canopy) | ![]() |
23078-01 |
| 23129-01 | Hardware Kit, Body Fan* (Contains the bolts and screws for mounting the body fan and shrouds) | 23129-01 | |
| P01135 | Hardware Kit, Main* (Use only if complete Kit was missing from shipment) Includes Pillow, Eyewear, Access Panel Key (P00684), Endcap Mounting Hardware and Canopy to Bench Mounting Hardware. Certain items also listed separately. | 23731-01 | |
| P01328 | Hardware Kit, Canopy* (Includes Canopy Adaptor Arms, Adapter Gussets and other Assembly Hardware. Certain items listed separately) | ![]() |
24677-01 |
| 20193 | Hour Counter (P00583) | ![]() |
20193 |
| 21329 | Ignitor (Starter for Face Tanner) (P00713) | ![]() |
21329 |
| 20210 | Lamp Holder Face Tanner (HPFT)* | ![]() |
20210 |
| 20081 | Lamp Holder, w/Starter | ![]() |
20081 |
| 20080 | Lamp Holder, w/o Starter | ![]() |
20080 |
| 20940 | Latch* (for Access Panel) | ![]() |
20940 |
| N/A | Manual* | 24386-01 | |
| P01512 | Paint, Champagne Touch-up* | ![]() |
24543-01 |
| P01337 | Panel, Left Pedestal Front | 24730-06 | |
| P01334 | Panel, Right Pedestal Front | 24729-03 | |
| Pillow* | ![]() |
23899-01 | |
| 20592 | Relay (Shoulder tanner or Bed Fans) | ![]() |
20592 |
| 23187-01 | Remote Connection PCB (P01010) | ![]() |
23187-01 |
| 21400-02 | Remote Control Bypass Plug (P00942) | ![]() |
|
| P01486 | Schematic Packet* | 24862-01 | |
| P01508 | Shoulder Tanner Assembly, Complete (as shipped in Box) instr. | 24660-01 | |
| P01477 | Shroud, Body Fan Inside | 24523-01 | |
| P01504 | Shroud, Body Fan Outside | 24524-01 | |
| P01302 | Shroud, Shoulder Tanner Inside | 24527-01 | |
| 23786-01 | Shroud, Shoulder Tanner Outside | 24528-01 | |
| Speaker (pair) | ![]() |
23786-01 | |
| 21651 | Speaker/Fan Bezel* | 24529-01 | |
| 21651 | Speaker Terminals | 21651 | |
| 20944 | Starter, K-12 (main lamps) | ![]() |
20944 |
| 20213 | Starter, S-2* (shoulder lamps) | ![]() |
20213 |
| Stereo* | 23845-01 | ||
| P01187 | Stereo Hardware Kit* (instr) | 23935-01 | |
| Stereo Power Supply* | 23844-01 | ||
| Support, Bench Acrylic* ("Kickstand")* | ![]() |
22923 | |
| 20455 | Thermostat* (for face tanner)* | ![]() |
20455 |
| 24178-01 | Timer (Instr.) | 24178-01 | |
| 24286-01 | Timer Interlink PCB (P01443) | 24286-01 | |
| 24176-01 | Timer Keypad* | 24176-01 | |
| 23515-01 | Timer Keypad Pushbuttons* (membrane keypad only) | ![]() |
23515-01 |
| P01297 | Trim, Bench Front | 24518-01 | |
| P00932 | Trim, Canopy Front* | 24516-01 | |
| Warning Label (English) | 24396-01 | ||
| P01271 | Warning Label (French) | 24396-02 | |
| 24486-04 | Wiring Harness, Keypad Link (Located inside Canopy) | ![]() |
24486-04 |
| 23120-04 | Wiring Harness, Remote PCB to Timer* | ![]() |
23120-04 |
| Wiring Harness, Resistor Code* | ![]() |
24488-04 | |
| 24486-03 | Wiring Harness, Timer in Tray (P00916) | 24486-03 | |
| 24486-04 | Wiring Harness, RJ-11 (140") (P01291) | ![]() |
24486-02 |
| P00578 | Wrench, Hex 1/4* (Allen wrench) | ![]() |
20179 |
| Wrench, Hex 5/16* (Allen wrench) | ![]() |
23752-01 | |