| Part Number |
Part Descriptions for U48PALMR |
| 23443-01 |
Air Dam (This is a piece of foam attached to the inside of the cover panels that is
used to route air flow) (P01057) |
|
| 24300-03 |
Ballast (220VAC, 160W) (P01240) |
 |
| 23470-01 |
Hinge Bushing (P01068) |
|
| 20989 |
Capacitor, 75µF (w/ screw stud) (P00693) |
|
| 20949-02 |
Capacitor, 6µF for Fan |
|
| 10070 |
Contactor (240VAC, 30A) (P00351) |
|
| 25884-01 |
Cover Panel (All panels the same except power panel (customer may also
need the foam Air Dam that is applied to the inside of the cover) |
|
| 25884-05 |
Cover Panel w/ Decals (Palm Beach) |
|
| 25884-11 |
Cover Panel w/ Power Cut-outs |
|
| 24412-01 |
Dome (Orange) |
|
| 23570-01 |
Fan, 6" Round (220VAC, 220 cfm) (P01100) |
|
| 24265-01 |
Fan, 16" Round (220VAC, 2910cfm) (P01231) |
|
| 23442-01 |
Grill, Booth (all 8 Grills are the same) (P01056) |
|
| 24197-01 |
Grill, Fan 6" Plastic (P01761) |
|
| 23474-01 |
Handle, Inside Door (P01070) |
|
| 23896-03 |
Handle, Inside (48 Booth, white) |
|
| 23468-01 |
Handle, Outside (Orange) (P01067) |
|
| 90192-01 |
Hardware Kit, Complete (Includes: Eyewear, Joint Plates, Bronze Hinge Bushings, Pins, Inside Door Handles and other hardware) |
|
| 25196-01 |
Hardware Kit, Dome Assembly (Kit for assembling dome only) (P01381) |
|
| 23471-01 |
Hinge Locking Pin (P01069) |
|
| 23451-01 |
Joint Plate |
|
| 20081 |
Lamp Holder w/ Starter Holder (P00554) |
|
| 20080 |
Lamp Holder w/o Starter Holder (P00553) |
|
| 23481-02 |
Magnet Strike Plate (Long) (P01072) |
|
| 27343-01 |
Manual, U48PALMR |
|
| 90286-01 |
Module, U48PALMR Control Assembly (complete module) |
|
| 90299-02 |
Module, U48PALMR Left Assembly (complete module) |
|
| 90299-01 |
Module, U48PALMR Right Assembly (complete module) |
|
| 90363-01 |
Module, U48PALMR Left Door (complete module) |
|
| 90363-02 |
Module, U48PALMR Right Door (complete module) |
|
| 90285-01 |
Module, U48PALMR Dome Assembly (complete module) |
|
| 27604-01 |
Pedestal |
|
| 23569-01 |
Profile, Trim Edge (P01097) |
|
| 23568-01 |
Profile, Trim Center (P01096) |
|
| 27239-01 |
Remote Connection PCB (with wireless connection) |
|
| 21400-02 |
Remote Control Bypass Plug (P00942) |
|
| 27259-01 |
Schematic Packet |
|
| 23700-07 |
Silk-screened Profile, 48 Palm Beach English |
|
| 23700-08 |
Silk-screened Profile, 48 Palm Beach French |
|
| 23786-01 |
Speaker (4", 80W, shipped in pairs) (P01157) |
|
| 25097-01 |
Speaker Grill |
|
| 21651 |
Speaker Terminals (P01483) |
|
| 20944 |
Starter, K-12/S-12 (P01395) |
|
| 90394-01 |
Timer Kit, Booth (12 min. Complete, Wireless Ready) |
|
| 27257-01 |
Timer PCB (ADI-C3, Wireless Ready) |
|
| 23930-01 |
Wiring Harness, Timer to Booth (P01185) |
|
| 27591-01 |
Wiring Harness, Timer Remote to Booth |
|
| 23931-02 |
Wiring Harness, Timer Internal (P01186) |
|
| 27590-01 |
Wiring Harness, Remote Internal (Wireless Ready) |
|
){kind=small}
){kind=small}
