| Part Number |
Part Descriptions for P-30SV3F |
| 24799-01 |
Acrylic, Bench (P01355) |
|
| 22590 |
Acrylic, Canopy (G2 to Present, 3F) (P00843) |
|
| 10120 |
Ballast (220VAC, 100W) (P00361) |
 |
| 20988 |
Ballast (220VAC, 400W) (P00692) |
|
| 24594-01 |
Bearing, Nylon Floating (P00345) |
|
| 23136-01 |
Body Fan Hardware Kit (Contains the Bolt, Nut, Spacer and Instruction Sheet for installing a Body Fan. This kit is only needed if they are missing from the canopy foot-end endcap.) (P01006) |
|
| H-22843 |
Body Fan Kit, Optional (Instruction Sheet) (P00885) |
|
| 21916 |
Bushing, Sintered Iron 10mm (replaces Bronze Bushing) (P00768) |
|
| 22839-03 |
Canopy Mounting Arm, Light Grey (P00951) |
|
| 20063 |
Capacitor, 75µF (P00549) |
|
| 10070 |
Contactor (240VAC, 30A) (P00351) |
|
| 10903 |
Cover, Bench Grey (Power Near Head-end) (P00426) |
|
| 25103-02 |
Cover, Canopy 3F (P01501) |
|
| 24489-01 |
Current Sensor (P01441) |
|
| 23081-01 |
Endcap, Kit and inserts (H-model thru Present ZX30, H thru K-model ZX32) (P00985) |
|
| 24472-04 |
Face Tanner Assembly #4 (complete reflector assembly with glass) (P01500) |
|
| 10081 |
Fan, 4" (220VAC, 110cfm) (P00355) |
|
| 26860-01 |
Gas Spring Cover Panel (Shipped in kit with Skirt Panel) |
|
| 20803 |
Gas Spring Set 1850N (Instruction Sheet) (P00669) |
|
| 20135 |
Grill, Fan 4" Wire (P00564) |
|
| 22838 |
Handle, Light Grey (P00884) |
|
| 25071-01 |
Hardware Kit, Complete (Includes: Safety Goggles, Pillow, Assembly Hardware, etc. Certain items also sold separately.) (P01373) |
|
| 20193 |
Hour Counter (P00583) |
|
| 21329 |
Ignitor (Starter for Face Tanner) (P00713) |
|
| 20080 |
Lamp Holder w/o Starter Holder (P00553) |
|
| 20081 |
Lamp Holder w/ Starter Holder (P00554) |
|
| 20210 |
Lamp Holder, Face Tanner (HPFT) (P00593) |
|
| 26849-01 |
Manual |
|
| 23102-01 |
Pillow, Grey Vinyl (P00992) |
|
| 24253-01 |
Profile, Blank (P01221) |
|
| 23187-01 |
Remote Connection PCB (P01010) |
|
| 21400-02 |
Remote Control Bypass Plug (P00942) |
|
| 24696-01 |
Schematic Packet |
|
| 24253-24 |
Silk-Screened Profile, English (P-30SV3F) |
|
| 24253-14 |
Silk-Screened Profile, French (ZX30 series) (P01224) |
|
| 26860-01 |
Skirt Panel (w/ SUNVISION Elite decal, Shipped in kit with Gas Spring Cover Panel) |
|
| 20127 |
Snap Rivet (For fan grill) (P00561) |
|
| 90151-01 |
Speaker Kit (Optional add-on) |
|
| 20944 |
Starter, K-12/S-12 (P01395) |
|
| 20455 |
Thermostat (For Face Tanner) (P00641) |
|
| 24178-01 |
Timer, ADI-HT (P01210) |
|
| 24270-01 |
Timer Keypad, ADI-HT (PCB only) (P01232) |
|
| 24687-01 |
Timer Keypad Pushbuttons, 3F (On bracket) (P01329) |
|
| 10894 |
Trim Profile, Gray (Full Length) (P00421) |
|
| 24486-01 |
Wiring Harness, RJ-11 120" (P00915) |
|
| 23120-02 |
Wiring Harness, Remote PCB to Timer (36") (P01000) |
|
| 24488-01 |
Wiring Harness, Resister Code (The resistor code almost NEVER needs to be replaced.
Replacing is not necessary and complicates the repair. To check the resistor code press
the fan button for three seconds, the second number displayed should be a "0".) (P01669) |
|
