| Part Number |
Part Descriptions for N-SUNDOME 100W |
| 23443-01 |
Air Dam (This is a piece of foam attached to the inside of the cover panels that is
used to route air flow) (P01057) |
|
| 22766 |
Ballast (220VAC, 100W) (P00865) |
 |
| 23470-01 |
Hinge Bushing (P01068) |
|
| 20989 |
Capacitor, 75µF (w/ screw stud) (P00693) |
|
| 20949-02 |
Capacitor, 6µF for Fan |
|
| 10070 |
Contactor (240VAC, 30A) (P00351) |
|
| 25884-01 |
Cover Panel (All panels the same except power panel (customer may also
need the foam Air Dam that is applied to the inside of the cover) |
|
| 25884-02 |
Cover Panel w/ Power Cut-outs |
|
| 25888-02 |
Decal, S2 Logo (P01860) |
|
| 25885-01 |
Decal, SunDome® 448V |
|
| 24412-01 |
Dome (P01277) |
|
| 23570-01 |
Fan, 6" Round (220VAC, 220 cfm) (P01100) |
|
| 24265-01 |
Fan, 16" Round (220VAC, 2910cfm) (P01231) |
|
| 23442-01 |
Grill, Booth (all 8 Grills are the same) (P01056) |
|
| 24197-01 |
Grill, Fan 6" Plastic (P01761) |
|
| 23474-01 |
Handle, Inside Door (P01070) |
|
| 23896-03 |
Handle, Inside (48 Booth, white) |
|
| 23468-01 |
Handle, Outside (Orange) (P01067) |
|
| 90192-01 |
Hardware Kit, Complete (Includes: Eyewear, Joint Plates, Bronze Hinge Bushings, Pins, Inside Door Handles and other hardware) |
|
| 25196-01 |
Hardware Kit, Dome Assembly (Kit for assembling dome only) (P01381) |
|
| 23471-01 |
Hinge Locking Pin (P01069) |
|
| 23451-01 |
Joint Plate |
|
| 20081 |
Lamp Holder w/ Starter Holder (P00554) |
|
| 20080 |
Lamp Holder w/o Starter Holder (P00553) |
|
| 23481-02 |
Magnet Strike Plate (Long) (P01072) |
|
| 25807-02 |
Manual |
|
| 23424-06 |
Module, Control Assembly (complete module in box labeled 2 of 7) |
|
| 23423-05 |
Module, Left Assembly (complete module in box labeled 3 of 7) |
|
| 23425-05 |
Module, Right Assembly (complete module in box labeled 4 of 7) |
|
| 23427-05 |
Module, Left Door (complete module in box labeled 5 of 7) |
|
| 23426-05 |
Module, Right Door (complete module in box labeled 6 of 7) |
|
| 23422-08 |
Module, Dome Assembly (complete module in box labeled 7 of 7) (P91041) |
|
| 23417-02 |
Pedestal |
|
| 23569-01 |
Profile, Trim Edge (P01097) |
|
| 23568-01 |
Profile, Trim Center (P01096) |
|
| 23187-01 |
Remote Connection PCB (P01010) |
|
| 21400-02 |
Remote Control Bypass Plug (P00942) |
|
| 24343-01 |
Schematic Packet |
|
| 23632-05 |
Silk-screened Profile, English (448V) |
|
| 23632-06 |
Silk-screened Profile, French (448V) |
|
| 23786-01 |
Speaker (4", 80W, shipped in pairs) (P01157) |
|
| 25097-01 |
Speaker Grill |
|
| 21651 |
Speaker Terminals (P01483) |
|
| 20944 |
Starter, K-12/S-12 (P01395) |
|
| 25267-01 |
Timer Kit, Booth (Complete, 12min.) (P01385) |
|
| 23631-02 |
Timer PCB (ADI-C) (P01110) |
|
| 23930-01 |
Wiring Harness, Timer to Booth (P01185) |
|
| 23933-01 |
Wiring Harness, Timer Remote to Booth (P01536) |
|
| 23931-02 |
Wiring Harness, Timer Internal |
|
| 23932-01 |
Wiring Harness, Remote Internal (K-model thru Present Booth) (P01517) |
|
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
