| Part Number |
Part Descriptions for G-ZX32 |
| P00799 |
Acrylic, Bench [008230622119] |
|
| P00798 |
Acrylic, Canopy* [008230622118] |
|
| 10120 |
Ballast (220VAC, 100W) (P00361) |
 |
| 24594-01 |
Bearing, Nylon Floating (P00345) |
|
| 23136-01 |
Body Fan Hardware Kit* (Contains only the Bolt, Nut, Spacer and Inst. Sheet for a Body Fan. This kit is only needed if the customer has lost the parts that come with the bed.) Instr. [008232313601] |
|
| H-22843 |
Body Fan Kit* (Contains the Body Fan and an Inst. sheet.) Instr. [008230620352] |
|
| 21916 |
Bushing, Sintered Iron 10mm (replaces Bronze Bushing) (P00768) |
|
| P00772 |
Canopy Mounting Arm [008230621948] |
|
| 10072 |
Contactor (240VAC, 40A) (P00353) |
|
| 20063 |
Capacitor, 75µF (P00549) |
|
| P00707 |
Cover, Bench [008230621088] |
|
| P00414 |
Cover, Canopy [008230610751] |
|
| click here |
Endcap, Kit and inserts |
|
| 10081 |
Fan, 4" (220VAC, 110cfm) (P00355) |
|
| 20317 |
Foot Cap (P00619) |
|
| 21733 |
Gas Spring Set 1500N Instr. [008230621733] |
|
| 20135 |
Grill, Fan 4" Wire (P00564) |
|
| 008230621045 |
Handle, (See Skirt/Handle Screws for Handle Screws) |
|
| P00723 |
Hardware Kit Complete*, includes Bronze Bushings, Bypass Plug, Foot Caps, Hardware Blister Pack, Latch Key, Pillow, Skirt/Handle Screws and Profile Removal Tool (Items also sold separately) [008230621508] |
|
| P01528 click here |
Hardware Blister Pack* |
|
| 20193 |
Hour Counter (P00583) |
|
| 22446 |
Keypad Assy Kit Instr. [008230622446] |
|
| 20080 |
Lamp Holder w/o Starter Holder (P00553) |
|
| 20081 |
Lamp Holder w/ Starter Holder (P00554) |
|
| 20941 |
Access Panel Key (P00684) |
|
| 008230622560 |
Leg Stand and Skirt Bracket Kit, includes the 2 main
Leg Stands and all four Skirt Mounting Brackets |
|
| 008230622033 |
Manual |
|
| 23102-01 |
Pillow, Grey Vinyl (P00992) |
|
| P00731 |
Profile [008230621554] |
|
| 22069 |
Remote connection PCB (single tap) (P00788) |
|
| 21400-02 |
Remote Control Bypass Plug (P00942) |
|
| 008230622373 |
Schematic Packet |
|
| 008230610560 |
Silk-Screened Profile |
|
| |
Skirt Mounting Brackets (see Leg Stand and Skirt Bracket Kit above) |
|
| 008230622556 |
Skirt Kit, Panels with Decal & Latch (Screws not included) |
|
| 008230622205 |
Skirt/Handle Screws* (Screws only, for Skirt, Skirt Brackets and Handle) |
|
| 20127 |
Snap Rivet (For fan grill) (P00561) |
|
| 20146-02 |
Starter, K-11 (P00570) |
|
| 22441 |
Timer Instr. [008230622441] |
|
| P00397 |
Trim Profile, (Yellow) full length [008230610620] |
|
| 008230610621 |
Trim Profile*, (Yellow) canopy rear middle |
|
| 008230610622 |
Trim Profile*, (Yellow) canopy rear ends |
|
| P00839 |
Trim Profile Removal Tool* [008230622472] |
|
| 10541 |
Wiring Harness, Keypad to Timer (P00386) |
|
| 23120-02 |
Wiring Harness, Remote PCB to Timer (36") (P01000) |
|
| P01527 |
Wiring Harness, Resister Code (The resistor code almost NEVER needs to be replaced.
Replacing is not necessary and complicates the repair. To check the resistor code press
the fan button for three seconds, the second number displayed should be a "0".) |
|
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
